High Density Polyethylene
Description:
HD-52518 is a HDPE copolymer which manufactured by gas phase process. This grade is LLDPE Injection Moulding, Extrusion Coating & Rotomoulding. Injection molding for application requiring a good balance between easy of processability and flowability and mechanical properties are the special perpuse of this grade.
PROPERTIES | TEST METHOD | UNIT | VALUE |
Density | ASTM D 1505 | g/ml | 0.952 |
MFR (190°/2.16kg) | ASTM D 1238 | g/10min | 18 |
Flexural modulus | ASTM D 790 | Mpa | 1350 |
Notched Izod impact at 23°C | ASTM D 256/A | J/m | 25 |
Vicat softening point | ASTM D 1525 | °C | 122 |
Applications
- Housewares, high fludity.
- Injection molding grade.
Features
Good balance between easy of processability and flowability.
The above values were calculated from data for 100 μm produced on a 75mm Barrnage extruder with 190°C melt temperature using a 2:1 blow ratio and a gap die of 3.0 mm.